VINYL INSTALLATION

Trust us with your vinyl installation!

Before your vinyl can be installed, we’ll need to remove your old flooring and make sure your subfloor is cleaned, leveled & prepared. Vinyl can then be installed with one of three different techniques: full spread, perimeter-adhered, or floating installation. With full spread installation, installers apply adhesive to the entire substrate. With perimeter-adhered installation, the adhesive is only applied to seams and perimeters of the vinyl flooring. Finally, a floating vinyl installation is when no adhesive is used to glue the vinyl to the substrate.

Shaw floor vinyl flooring | Mill Direct Floor Coverings
Vinyl installation | Mill Direct Floor Coverings
What to expect during and after installation

Depending on the type of vinyl you have selected for installation, the process will vary in duration. You'll need to keep pets and children away from the area for their own safety. Once the job is done, you’ll need to make sure your room has good ventilation. You can help ensure good airflow by opening windows, turning on fans, and taking other steps to air the room out for about 48 to 72 hours. Then, it’s up to you to properly care for and maintain your new vinyl floor.

Flooring | Mill Direct Floor Coverings

SHOP AT HOME

Shop for new flooring from the comfort of your own home with our shop at home services!

measure | Mill Direct Floor Coverings

Contact Us

Starting your next flooring project? Contact us with any questions you might have.

Hardwood flooring | Mill Direct Floor Coverings

COMMERCIAL & MORE

Explore durable flooring solutions for any commercial application.